Your question about SiemensS30810-Q2096-X200 DIUS2

The DIUS2-module board S30810-Q2096-X200 (Digital Interface Unit ISDN) is intended for the Siemens Hicom 300 and HiPath 4000. The module board has a digital S 2-interface for EURO-ISDN. The DIUS2 enables two Primary-Access-(PMA)-interfaces S 2 according to CCITT:

• Incoming line-signals on line 0 and 1. Transmission-rate: 2048 kbit/s, Coding: HDB3
• Outgoing line-signalson line 0 and 1 (line 1 and 2). Transmission-rate: 2048 kbit/s, Coding: HDB3
• Every line-signal on the lines has 30 B-channels, 1 D-signalizing-channel and 1 synchronizing-channel per plug

Specifications:

• Interface:
• S 2M = Trunk interface
• Da 2M = digital vertical line (public)
• S 2 = digital vertical line (private) for the connection to HOST, SERVER,GATEWAY
• Range 6 dB
• Transmission bandwidth 2 x 2048 kbit/s (2 HWYs), consisting of  30 B-channels, 1 signalizing-channel (D-channel) and 1 synchronizing-channel with 64 kbit/s
• Statistic for layer-2-protocol on the S 0/S 2-interface
• Offers via the clock generator of the system a reference clock,  which is derived from one or both line signals
• Adapter-plug for electric or optical transmission lines

The adapter-plug is not included, please order seperately!

Compatible to the following systems:

• Hicom 300E
• Hicom 300H
• Hipath 4000 up to software-version V4.0
• DO NOT apply in combination with the CSPCI control!